Grid Marking Equipment
Lectroetch Grid Marking is
available in stencil sizes to 10 in. x 20 in.,
factory processed with a variety of
square or circular grid patterns. The
stencil can be applied to sheet metal prior
to forming and the grid pattern is
reproduced with the use of a heavyduty
power unit and a rocker pad or a roller
marker.
A wick pad is dampened with
electrolyte and placed on the stencil.
The marker is rolled or rocked back and
forth over the pad and stencil. A clear,
sharp, permanent mark is produced in
seconds.
The blank is cleaned, lubricated,
and formed, after which the distortions of
the circles are measured and proper
interpretations made. Large areas can be
gridded by moving the stencil in steps
across the blank.

GMK Grid Marking Kit
Includes the following items:
- 1 - V-45A power unit
- 1 - HDU cord set
- 1 - 7 in. x 10 in. microswitchactivated
rocker pad or 10 in. roller marker.
- 1 - Grid pattern stencil of customer, s
choice up to 10 in. x 10 in.
- 1 - Mylar measuring tape for
interpretation
- 1 - Quart each of electrolyte and
cleaner
GK Optional Fitted Carrying Case For GMK
LE 28780
Roller Markers Available in
Various Lengths |